Auto-disable not found spot colors

Auto-disable not found spot colors

What

For packaging proofs the technical channels like die-lines, varnish etc must be disabled (not-show, not-print) automatically.
Only leaving process and recognised spot colors enabled.

Available from V6.7.0 onwards

Where to find

1.  Editor: Preferences -> Standard 




2. Rip Queues:  Output tab


    • Related Articles

    • Spot Color Handling

      How PrintFactory handles spot colors in jobs Jobs may contain spot colors. If so, PrintFactory will check the profiles and libraries for these colors in a given sequence. If the spot color cannot be found, an error will be generated. This is how ...
    • Hide PMMs

      Purpose Hide PMM function in Calibrator is used to reduce the list of visible pmms shown in Editor, Layout, RIP queues and Workflow. The pmm will still remain visible in Calibrator where you can turn its visibility back on. Use case: for printers ...
    • Combining Spot Tuning charts

      Several spot tuning charts can be combined and printed as 1 job. This is found in Calibrator > Spot Colors > tune This is available from V6.7.0 onwards How to combine the charts Calibrator: 1. Select Spot colors in the mode setting of the pmm 2. ...
    • Spot Colors

      A key feature in PrintFactory is the precise spot color processing. In digital production, spot colors such as Pantone™, DIC or HKS can rarely be printed directly and nearly always need to be reproduced by the process colors of the respective ...
    • Clean Spot Colors

      As well as being able to ‘tune’ a spot or named color, these colors can now be further ‘cleaned’ close to 0% noise removal to a maximum close to 100% cleanliness. From Calibrator a Spot Color can be selected and be independently adjusted within the ...