Community profiles

Printer profiles made available by either the dealer, manufacturer or PrintFactory can be imported directly into Calibrator after loading the driver to the RIP. A pop-up windows appears showing all new pmms/ iccs available to automatically install. This includes profiles that are installed on the printer itself, such as on HP Latex series.

If a printer of the same model / or a compatible printer model already exists in the organisation, then the profiles that are already available in Calibrator are greyed out.

The user can choose which profile to install.

Community Profiles are available from V6.5

In the case of a HP Latex, you can create additional profiles on the printer using the front panel touch screen menu and on-board spectrophotometer. After creating new profiles on the printer you will need to restart your RIP to force a new sync between Printer->RIP. After this you can right click and open the Community profiles window again to find the newly made profiles & select them to import into Calibrator:

• Related Articles

• Dealer Community Profile Management

  Enabling The enable Community Profile Management for a dealer there a 2 prerequisites: Access Control needs to be switched on for the dealer. The person(s) who/which are allowed to manage the profiles need to have the right "Manage Community ...

• Community profiles

  Printer profiles made available by either the dealer, manufacturer or PrintFactory can be imported directly into Calibrator after loading the driver to the RIP. A pop-up windows appears showing all new pmms/ iccs available to automatically install. ...

• Import and Export Profiles

  Import a profile Proceed as follows: In the calibrator, Click Import. Navigate through your finder to the Profile/ Profiles required. Click Open. NB. The profile will only load if the RIP has the Driver loaded that matches the profile to be imported. ...

• Creating and Tuning of DeviceLink profiles

  About DeviceLink profiles To improve the color accuracy of your proofs, you can create and use a DeviceLink profile. A DeviceLink is a link between the reference profile and the printer profile of your queue. The DeviceLink profile directly ...

• Media compensation caused media size to exceed printer width

  When working with media size compensation in PrintFactory, it’s important to understand how compensation affects the overall media width. If the compensation value increases the media size beyond the "full width" setting, it will cause you to be ...