Epson 4000 – Allowed Media per Tray
The paper path requirements depend on the media you use. This error occurs when paper is loaded using the wrong paper path. Choose the correct paper path for the media you are using:
| Paper Tray |
|
| Front Manual Feed Slot (Use for Large Heavy Media) |
|
| Rear Manual Feed Slot |
|
Related Articles
My Printer is Feeding Extra Media After My Job is Completed
Issue: If you experience an issue where you print a job and the paper keeps feeding through the printer and wastes a lot of media, this article is for you. While this issue was originally noted on the Epson SureColor 9570/9500 this could happen on ...Epson EMX
What: Epson provides EMX profiles containing the settings and ICC profiles for many Media & Mode combinations for their printers. Those EMX files can be downloaded using the Epson Edge Dashboard. After setting it up you will have access to the ...Media compensation caused media size to exceed printer width
When working with media size compensation in PrintFactory, it’s important to understand how compensation affects the overall media width. If the compensation value increases the media size beyond the "full width" setting, it will cause you to be ...Calibrating Between different Printers and Media
What When there is the need to print the same output on different printers, same printers in a pool and across different batches of media or even different substrates then VISU delivers a number of methods to achieve it. How Below we discuss the ...Continuous printing on Epson SC-R5000
There is a method to print "continuously" on the Epson SC-R5000. This means that there will be a smaller gap between the jobs and the printers cool down/warm up sequence will be skipped. The prerequisites for this are as follows: 1. Turn off job ...