Epson Pro 4900 Spectroproofer: ILS measuring in wrong place

Epson Pro 4900 Spectroproofer: ILS measuring in wrong place

Epson 4900: ILS20: seems to measure in the wrong place and does not pass 1st reading line Cause: Image was centered. Resolution: Important to set left alignment and respect the built in margins.
    • Related Articles

    • Epson EMX

      What: Epson provides EMX profiles containing the settings and ICC profiles for many Media & Mode combinations for their printers. Those EMX files can be downloaded using the Epson Edge Dashboard. After setting it up you will have access to the ...
    • Epson SC-S80600 Layering

      This article explains the layering options in the Epson SC-S80600 driver. Inkset: First of all, in order to be able to print in multiple layers you need to select a layering inkset: 1. Color = Color only 2. Color + White = Color & White in one layer ...
    • Epson 4000 – Allowed Media per Tray

      The paper path requirements depend on the media you use. This error occurs when paper is loaded using the wrong paper path. Choose the correct paper path for the media you are using: Paper Tray Epson Premium Semigloss Photo Paper Epson Premium Luster ...
    • Difference EPSON HT / CT

      Standard (Halftone) The halftone driver is a multichannel driver, that can be recognized in the printer driver list as the driver without the “(CT)” extension. This driver requires linearization of all the ink channels (for example: Cyan, Magenta, ...
    • Ultra Violet (UV) and Optical Brightening Agents (OBA) with M0,1,2,3 Measuring Modes

      M0, M1, M2, M3 measuring mode settings These ‘M’ modes have been defined in order to standardise the illumination conditions where Optical Brightening Agents (OBA) are used in substrates, in accordance with the International Standard Organisation ...