HP Latex On-board Spectrophotometer
The HP Latex series offer an build-in measurement device for all supplied models. There is a difference in use and support between the small (baby) and large models (LX).
Latex 200/300/L25500/L26/L500 (baby) series
The build-in measurement device of this printer can be used directly from the Calibration software to measure charts.
The measurements can be used in theory to measure the linearization charts and the calibration charts. In practice it is not recommended to measure the calibration charts using the internal measurement device. Therefore only use the internal measurement device for linearization or a non-binding certification.
Latex 700/800/700w/800w/2000/3000/L65500 series
The build-in measurement device of this printer is not accessible from any external software and used only to update the internal linearization and ink split tables. This function can be accessed in the media set-up of the DFE that is part of the printer.
Any job send from the RIP and Calibration software will be processed using the printer-internal linearization and ink split tables when the on board ICC profiles are used. (Contone printing). Thus updating these tables using the build-in measurement device will influence any print and thus also the calibrations made using the Calibration software. It is therefore recommended to create the linearization and ink split tables only once when creating a custom media on the DFE. Afterwards keep the calibration updated using the Calibration software and an external measurement device.
Related Articles
Community profiles
Printer profiles made available by either the dealer, manufacturer or PrintFactory can be imported directly into Calibrator after loading the driver to the RIP. A pop-up windows appears showing all new pmms/ iccs available to automatically install. ...
HP Job status reporting - settings in IPS
When enabling the Job Status tracking for HP Latex series, following setting on the IPS need to be enabled. The communication for copy count and ink status is reported back to the RIP via JMF notifications. In case the jobs are removed from queue, it ...
HP Latex R1000/R2000 Job Flow
The HP Latex R1000 and R2000 flatbed printers have their own digital front end internal print server (IPS). PrintFactory will output ripped files to the output folder specified in the RIP device options. The PrintFactory ripped files can be ...
Installing an HP Scitex 15000: Driver Selection Guide
When setting up an HP Scitex 15000, it's crucial to select the correct driver for seamless integration with PrintFactory RIP. Here’s what you need to know: 1. Setting Up PrintAgent The HP Scitex 15000 requires the use of PrintAgent. Before ...
HP module triage
When the communication between the RIP/Calibrator and the HP Latex leads to errors that are not related to connectivy (like TCP issues, firewalls, etc) then a communication log needs to be created. This applies to: HP Latex 630 series HP Latex 700 ...