RIP Error 28 and -39 on Mac

RIP Error 28 and -39 on Mac

When you see Error 28 in Processing tab, followed by an macOS error -39 in spooling tab in the RIP on Mac, this points to disk full.

The files are not being written properly due to disk space. 
  • Error 28 → disk full
  • → temp file missing  => e.g. in RIP log you see:   ACPL error:  Open failed with 2 on file:  .../document.bin 
  • Error -39 → file incomplete

Please check disk space of work folder - min. is 5GB
RIP -> Preferences -> Work folder  (default is \users\shared\printfacotry\work
Job info: right click job in RIP and select Job Info -> Log tab


    • Related Articles

    • RIP error: 'Connection forcibly closed by remote host'

      This error appears in the Print tab of the RIP. The cause is either: - a comms issue (e.g wrong IP) or - a file issue (sending wrong format, wrong size due to settings on Printer Controller,..) Triage process: Case of Hosonsoft with PrintBridge - ...

    • "PMM is not calibrated on this printer " Error in RIP

      “PMM is Not Calibrated” Message in PrintFactory RIP Issue When sending a print job you may see the popup: “PMM is not calibrated on this printer” This reminder appears and it will prevent the job from printing until dismissed. Cause The RIP’s printer ...

    • RIP Print Error: File failed to send file file (10054)

      Issue: When sending a job from PrintFactory RIP to a SwissQprint device, the following error appears: Failed to send file (10054) Cause: This error indicates that the connection was forcibly closed - in this case, due to the output drive (usually D:) ...

    • Authentication error printing from Mac applications

      When printing from Mac applications like Adobe CS3/CS4 the following error can appear: /usr/libexec/cups/backend/hotfolder failed Cause This problem is caused by the access rights on the hotfolder of the queue that is used for printing on the ...

    • My Printer is Errored or Disconnected From the RIP

      When your printer is in a red state, it can halt your printing tasks. This article is meant to cover the most common solutions to these issues. The first step would be to note the error messages in the RIP that may be helpful. Error Message: No ...