Screening Properties

Screening Properties

To set the screening properties of a PrintFactory Queue Proceed as follows:
  1. Double-click the PrintFactory Queue of your choice.
  2. Make sure that the correct Queue type is selected.
  3. Click the Screening tab.
  4. For each of the color channels, check and, if necessary, change the:
    • Halftone screen angle
    • Screen frequency (lpi)
    • Dot shape
  5. If you want PrintFactory to smooth (dither) the edges of the printed dots, select Anti-aliased halftones.

To add a channel

Proceed as follows:
  1. Click the Add button.
  2. If necessary, double-click New Channel and rename the channel.
You can give the new channel a generic or a specific name:
  • If you don’t rename the channel and use the generic name “New Channel”, all non-CMYK channels will be screened using the angle, frequency and dot shape settings which you specified for this particular channel.
  • If you use a specific name, for example “Warm Red”, only the non-CMYK channel with that particular name will be screened using the angle, frequency and dot shape settings which you specified for this channel.

   3. If necessary, double-click the color patch next to the channel name and define its display color.



    • Related Articles

    • Layout Properties

      To set the layout properties of a PrintFactory Queue Proceed as follows: Double-click the PrintFactory Queue of your choice. Make sure that the correct Queue type is selected. Click the Layout tab. Set the layout properties of the PrintFactory Queue: ...
    • Input Properties

      To set the input properties of a PrintFactory Queue Proceed as follows: Double-click the PrintFactory Queue of your choice. Make sure that the correct Queue type is selected. Click the Input tab. Set the input properties of the PrintFactory Queue: ...
    • Output Properties

      To set the output properties of a PrintFactory Queue Proceed as follows: Double-click the PrintFactory Queue of your choice. Make sure that the correct Queue type is selected. Click the Output tab. Set the output properties of the PrintFactory Queue: ...
    • Proofing Properties

      To set the proofing properties of a PrintFactory Queue Proceed as follows: Double-click the PrintFactory Queue of your choice. Make sure that the correct Queue type is selected. Click the Proofing tab. Set the proofing properties of the PrintFactory ...
    • Calibrator: FM and ED dot patterns

      Generic info on FM and ED screening FM Screening Whereas conventional screening methods place dots in a grid pattern to reproduce a continuous tone image with FM screening, tone densities are varied by placing different numbers of small dots within a ...