Installing swissQprint printers with Lory DFE

When installing the swissQprint  driver in the RIP, the specific content for this driver (e.g. ink channels, print modes,..) needs to be obtained from the .SQPE configuration file created on the Lory Digital Front End(DFE) of the printer.

To find the .sqpe file you need to go to the Lory interface, go to the Extras menu -> Export RIP configuration:

This will export configuration .SQPE file. You need to copy this onto a USB drive or onto an accessible network location so that you can access this file on the PrintFactory RIP computer.

When adding the swissQprint Kudu/Karibu/Nyala-5/Impala-5 (or any other device using the Lory front end) you need to click the "Select SQPE" button and locate and select the file previously exported from Lory:

After you have selected the .SPQE file and an output folder for ripped jobs, you can click OK.

If you fail to select an .SQPE, the default .SQPE will be used and it will not match your specific printer ink channels and available modes.

• Related Articles

• swissQprint Relief & Textured Printing

  swissQprint UV inkjet printers are capable of impressive relief and textured printing, offering a range of capabilities that cater to the demands of various industries. These printers are recognized for their proficiency in creating layered relief ...

• SwissQprint Nyala-4: 3 and 5 layer printing - driver settings

  Below is the layering in the driver setup to print 3 and 5 layers for the Nyala. To set up the File in Layout: Double sided needs to be enabled: more info on Layout setup for multi layering A. 3 Layer with same image Front and Back Layering = Color / ...

• Layout: Searching for printers

  When Layout is first started it will display the message "Searching for printers" After a short wait, this message will disappear and you can then proceed to create your job in Layout. In some circumstances this message will stay on the screen and ...

• PrintAgent Support for DFE’s

  PrintAgent (PA) is a service that can be installed on Windows or Linux operating systems on the DFE of a printer or cutter. It functions as a local application, allowing remote RIPs to access local files on the DFE and spool files to the local hard ...

• Installing Printer & Cutter USB Drivers

  Manual installation of printer drivers Requirements for installing manufacturers’ driver software are generally platform-specific. Manual installation of printer drivers is: Almost never necessary on Macintosh computers. Mac OS X displays messages in ...