Clean Spot Colors

Clean Spot Colors

As well as being able to ‘tune’ a spot or named color, these colors can now be further ‘cleaned’ close to 0% noise removal to a maximum close to 100% cleanliness.
From Calibrator a Spot Color can be selected and be independently adjusted within the black generation.

Adjusted when greater than 0.5 dE2000 in the gamut they can be gradually increased to reference dE 
for out of gamut colors with custom spot color separation.


    • Related Articles

    • Auto-disable not found spot colors

      What For packaging proofs the technical channels like die-lines, varnish etc must be disabled (not-show, not-print) automatically. Only leaving process and recognised spot colors enabled. Available from V6.7.0 onwards Where to find 1. Editor: ...

    • Spot Color Handling

      How PrintFactory handles spot colors in jobs Jobs may contain spot colors. If so, PrintFactory will check the profiles and libraries for these colors in a given sequence. If the spot color cannot be found, an error will be generated. This is how ...

    • Combining Spot Tuning charts

      Several spot tuning charts can be combined and printed as 1 job. This is found in Calibrator > Spot Colors > tune This is available from V6.7.0 onwards How to combine the charts Calibrator: 1. Select Spot colors in the mode setting of the pmm 2. ...

    • Spot Colors

      A key feature in PrintFactory is the precise spot color processing. In digital production, spot colors such as Pantone™, DIC or HKS can rarely be printed directly and nearly always need to be reproduced by the process colors of the respective ...

    • Layout Job list menu

      Right click on any file in your Layout job list to find some additional menu items: Rename document: To rename the document in the list. It will also rename the nest name (top right of Layout) Revert document: Revert the document to it's original. ...