Drivers
Mimaki JFX Multiple copies
It is possible to print multiple copies from the RIP to the Mimaki JFX series flatbed printers. Each copy of your job will print independently on a new sheet. You must first enable the “Work Change” setting on the printer to ON: You can also set the ...
Roland decoupled Print & Cut
This document is written to clarify the working of Roland Registration Markers and to give some hints what could be wrong in some cases. Introduction First of all we will show you a snap of the Output Inspector so it will be clear what to expect when ...
Roland LEC, LEJ, LEF Information
General Although this info is first written concerning the LEC 330, the described info is also very usefull information for other LEC, LEJ and LEF printers. Available ink sets The Roland LEC 330 is available with one of the following ink sets. CMYK + ...
Inca Multi Layer Printing
For the Inca OnSet S40 and Q40 multi layer printing is available in the driver. Allowing to print Color and White separately using different modes/speeds and densities for color and the white layer. Also it support Color-White-Color using several ...
Epson EPHR Error: Generic/Unknown error
An Epson EPHR error is a generic and/or unknown error. This error could be received if the Firmware on the printer is not up to date and therefore does not correlate with our driver version. Please update to the latest Firmware and try again. Follow ...
Epson 4000 – Allowed Media per Tray
The paper path requirements depend on the media you use. This error occurs when paper is loaded using the wrong paper path. Choose the correct paper path for the media you are using: Paper Tray Epson Premium Semigloss Photo Paper Epson Premium Luster ...
Difference EPSON HT / CT
Standard (Halftone) The halftone driver is a multichannel driver, that can be recognized in the printer driver list as the driver without the “(CT)” extension. This driver requires linearization of all the ink channels (for example: Cyan, Magenta, ...
Durst Linux Integration
Network topology The default setup of a Durst computer is to connect it in a private network with the supplied Caldera RIP computer. To enable access there are three options: Move the printer in the main LAN Add a switch to the private network and a ...
Zund and Kongsberg driver review V6.6
The Zund and Kongsberg drivers have been overhauled in V6.6.0. All variants of the Zünd and Kongsberg tables have been merged. Each driver now incorporates the various length variations and different output methods .ai, .cut, .zcc, .zip The driver ...
Cutting Kiss and Flex paths in one file on Summa S2 Series
What This procedure explains how to set up the Summa S2 Class cutter to Kiss cut and Flex cut in one process. How 1. The File Ensure the file has two separate cut layers, one for Kiss cutting and the other for Flex cutting. It is usually expected ...
Graphtec FC8000 driver settings and workings
This document explains some functionalities of the Graphtec cutter driver and its workings Settings change for PrintFactory V6 The Graphtec FC8000 driver has been updated with 64 bit dlls in PrintFactory V6.This requires a setting change on the ...
HP Latex 300 and 500 series reported CMYK instead of CMYKcm + Optimizer in the ink calculation
An ink price list with all the cartridges available can be created only after printing at least one job at the printer.